Rack Studs
Rackstuds™ Series II are a faster, easier way to mount your equipment in 19″ racks.
Rackstuds™ install from the front and provide you with a place to support your equipment while you spin on the lock nut. This makes inserting and removing Rackstuds™ much quicker and assists with mounting even heavy equipment as it no longer needs to be balanced in one hand! Rackstuds™ are much simpler, faster, safer and very strong.
Rackstuds™ are made from a metal replacement thermoplastic called Grivory. They are rated to hold equipment up to 20Kg (44lbs). In under 55 seconds, you can complete a typical network switch installation. Over the course of a rack build, you can save hours.
Rackstuds™ are suitable to use with our EziBlank® 19”, 21″ and 23″ 1RU Brush Panels. EZBR19X1UPNL05 (19″ 1RU Brush Panel – 5pk) already includes Rackstuds™ for installation. EZBR21X1UPNL02 AND EZBR23X1UPNL02 require you to purchase Rackstuds™ separately.
Get A Quote
Features:
- Open-ended design for direct fitting onto existing installations.
- Non-conductive Reinforced Thermoplastic is used to make Rackstuds™
- Robust lightweight construction that is strong and flexible.
- No Electrical threat to you or your equipment.
- Wont Scratch Equipment as they are made of high quality plastic.
Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
Documents
Specs
Hole Size: 9.2 – 9.89mm/0.362 – 0.389”
Rail Thickness: ≤2.2mm/0.086 (or 14 gauge)
Version: 2.2
Colours: Black, Yellow, Red
10 units per pack, 2 parts per unit
Packaging
More on Rack Studs
Our Data Center Products
Blanking Panels
Brush Panels
Modular Wall Panels
Eziblank Blanking Panels
19″ 6RU Universal Blanking Panel
19” 6RU Standard Blanking Panel
23″ 6RU Universal Blanking Panel
